Accessories

10-liter starter pack to brew good beer at home. Buy to prescription kit and start brewing! 

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Grifo Bench Capper- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Juice Strainer with removable strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. easy to clean after use.

Juice Strainer Bag

Jonas Juice Strainer Bag with polyester weave.

Juice Strainer with removable polyester strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. Easy to clean after use.

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Plastic Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RMCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Pot 12L with lid&scale

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

Bulldog Hop Spider that fits breweries ad kettles up to 38cm in diameter.InfoMaterial: 304 stainless steelMesh size: 300 microns (0.3mm)Height: 30 cmDiameter: 20 cmLength steel rods: 9 cm (M8 screws)

Cooling Spiral 5m 3/4-inch Quick Connerctor compatible.Spiral diameter: 200 mmSpiral tube diameter: 10 mmSpiral height: 90 mmTotal height: 400 mm Max recommended kettle depth: 450 mmFittings: 3/4" for gardena

Cooling Spiral 7,5m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quck Connect garden hose connectors.Spiral tube diameter: ca 10 mmSpiral height: ca 90 mmTotal height: ca 400 mmTotal spiral diameter: ca 255 mmThreads: 3/4" (fit 3/4-inch Gardena-style garden hose connectors)

Cooling Spiral 15m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quick Connect garden hose connectors.Spiral tube diameter: 10 mmTotal diameter: 24 cmTotal height: 69 cmThreads: 3/4-inch (fit 3/4-inch Gardena-style garden hose connectors.)

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume250 ml / 8.5 fl.oz

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume1000 ml / 34 fl.oz

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Chemipro-Oxi Sanitizer

Wyeast Nutrient Blend 42g

Five Star pH 5.2 Stabilizer 113g

Five Star pH 5.2 Stabilizer 450g

Protafloc is a clarifying agent based on Carragenan (the active sunstance in Irish Moss). Dosage 2-3g per 100L. Add 15 minutes before end of boil.Weight: 50g

Bottle Steinie 33cl Patent Cap 12-pack

Bottles 33cl 28-pack Longneck

Bottles 33cl 28-pack Stubby. Light weight bottles that have thinner glas than for example Longneck, a bench capper like the Grifo is therefore preffered compared to a hand capper.

Bottles 33cl 28-pack Shortneck

Bottle labels in 40-pack on A4 sheets. 8 white paper labels with glue per A4. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable by soaking them in hot water for 15 minutes.Link to Word templateDownload the template for Word hereUse the Word template to design your labels.Link to PDF templateDownload hereUse this template to design your labels in for example Adobe Photoshop or Illustrator.Label MeasurementsWidth: 105 mmHeight: 74 mm

Multi-Purpose labels in 800-pack on A4 sheets. 8 white paper labels with glue per A4. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable by soaking them in hot water for 15 minutes.Link to Word templateDownload the template for Word hereUse the Word template to design your labels.Link to PDF templateDownload hereUse it to design your own labels in for example Adobe Photoshop or Illustrator.Label MeasurementsWidth: 105 mmHeight: 74 mm

Brew Bag 10L is a strong nylon bag for BIAB (Brew-In-A-Bag). Measures 55x35cm. Fits most kettles between 5-15L up up 30cm in diameter. Easy to clean.Length: 55cmDepth: 35 cmMaterial: Nylon, BPA free.Note: Kettle is not included. This is the same Brew Bag that is included in The Home Brewery's 10L Receipe Kits.

Brewly Brew Bag 40L is a strong nylon bag for BIAB (Brew-In-A-Bag). Measures 55x75cm. Fits most kettles between 10-40L up to 35cm in diameter. Easy to clean.Length: 55cmDepth: 75 cmMaterial: Nylon, BPA freeNote: Kettle is not included.

Mash Grid 255mm

Brewly AC-211 Digital Universal Thermostat. EU-version power cord (UK power cord not included). Can control one Heating source and one Cooling source. Sensor included.

Classic brewing thermometer made of glass. Scale is -10 till 110 degrees celcius. 30cm in length.

Thermometer Floating

Brewers paddle 52cm

Bulldog Mash Paddle in 304 Stainless Steel. 61cm in length.

Coobra Mash Paddle in 304 Stainless Steel. 60cm in length.

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort. Grainfather Whirlpool and Aeration Paddle:- 304 stainless steel, 8mm (1/3”) drill bit end and 12.5 cm (5”) wide blades- Designed to be easily attached to a power drill via an 8mm (1/3”) drill bit style end- Plugged at the end- 56cm (22”) long, perfect for use in large boilers and smaller stove top kettles- 12.5cm (5”) wide blades to create a strong aeration and whirlpool

Jug Plastic 1L/35oz

Muslin bag 1-pack

Muslin bags 10-pack

Refractometer with Automatic Temperature Correction (ATC) and dual scales: 0-32°Brix and up to SG 1.130.

Bazooka Screen 15cm/6"

Bazooka Screen 30cm/12"

Bazooka T-Screen 2x15cm

Malt Scoop Stainless Steel

Bulldog Malt Mill

This is a simple, reliable and efficient magnetic stirrer for up to 5L flasks. Excellent speed precision. Remains cold even after several days of continuous use. Ensures a high resistance to chemical agents. - High Reliability- Control panel is shielded from liquid spills- Epoxy-coated tough steel casing- Long life operation- Accepts up to 5 liter flasksFeatures- Pale surface for visualization of particles and color changes- Remains cold, even after days of continuous use- Specifically designed for microtitration- Excellent speed control, even at low speed- Simple & Practical- Precision speed regulation up to 1100rpm- Universal mains voltage / frequency range- Light weightTechnical data: Fisher Scientific Microstirrer Magnetic StirrerHeight: 48mmWeight: 0.55KgSpeed: up to 1100RPMMaterial: Epoxy, MetalSpeed Control: Excellent speed control even at low revolutionsSize: 48 H x 120 W x 128 DmmWattage: 0.6WWidth: 120mmVoltage: 100-240VHertz: 50/60HzElectrical Requirements: 100 to 240V, 50/60Hz, 0.6W

The heat pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. To be placed under the fermenter. Suitable for fermentation in cold areas such as in a refrigerator or in the basement, garages or on the balcony. Provides a low constant heat to the fermenter which aids yeast activity and helps avoid stuck fermentations.Use preferrably in cojunction with an Universal Thermostat (not included).Features:- Inexpensive to run. - Voltage: 220-240V EU-version power cord (UK power cord NOT included).- Power: 25W- Width: 32 cm- Length: 32 cm

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 500 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm.

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear plastic giving you the possibility to evaluate the colour/ clarity and to read your hydrometer. Closes automatically, so no difficult finger exercises! 50 cm long for easy and automatic filling without the need of suction. Hydrometer is not included.Weight 0.08 kgLength 58.2 cmHeight 3.5 cmWidth 10.2 cm

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume5000 ml / 169 fl.oz

The Brew Cooler XL is an extra large waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters and kegs up to 30L. Either one 30L fermenter or two cornelius kegs fits inside. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler XL worksThe function is simple, place your fermenter or keg(s) inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler XL 30L specificationsHeight: 70 cmLength 40 cmWidth: 40 cmInternal supports: 60cm Vertical rib supports keeps the bag upright by itself.Material: Tough black polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.Note: Fermenters, kegs or other accessories are not included.

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RM Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" BSP threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

White Thread Seal 15mm wide and 12 meters on the roll.

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications.  This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals. These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing.  For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard.Suitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 8mm (5/16) OD Tubing such as our Evabarrier TubingIncludes integrated 0-60psi Pressure Gauge

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic.

Graded and food-grade plastic can of the highest quality. Neutral translucent colour.Plastic can 5L incl. CapVolume: 5 liters with screw cap.Material: polyethylene (HDPE)Width: 12 cmDepth: 18 cmHeight: 30 cm

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Coobra Malt Mill

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

Coobra Screw Driver Adapter for Malt Mill

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

Crown Caps 75-pack Black 26mm

Lauter-Helix 1000mm is a stainless steel , flexible spiral filter tube made to filter the vort from hops and debris between brewery/kettle and fermenter. Easy to clean by hnd or dish washer. Fitting: NPT 1/2".Can replace the bazooka filter in Coobra CB3 and CB5 together with a "Hexagon double nipple connector NPT 1/2" to NPT 1/2" which is sold seperately. May also fit other breweries.

Hexagon Double Nipple NPT 1/2" to NPT 1/2". Stainless steel. Fits amonst other things Lauter-Helix 1000mm.

Protafloc is a clarifying agent based on Carragenan (the active sunstance in Irish Moss). Dosage 2-3g per 100L. Add 15 minutes before end of boil.Weight: 40g

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm barb at the opening.Tappkran i rostfritt stål som passar de flesta bryggverk. Gummitäckt handtag med autolåsfunktion. 1/2" gänga och levereras med rostfri 1/2" mutter samt silikonpackning. 13mm nippel på utloppet. Tillverkad i 304-rostfritt stål.

Brewly Blue Rubber for Tap. Spare part.

Bottles 50cl 12-pack for 26mm caps

Quick Disconnect O-ring Silicone 21x15mm

Nylon bag 20x20cm

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

Coobra VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 350L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.

Protafloc is a clarifying agent based on Carragenan (the active sunstance in Irish Moss). Dosage 2-3g per 100L. Add 15 minutes before end of boil.Weight: 200g

Grainfather Magnetic Pump MP-10RN with C14 plug. Original. Standard 14mm input/output.

Plastic Head for Magnetic Pump MP-15RM (spare part).