Sale
Keg Kit 1 (without keg)
A complete keg kit without keg, includes sodastream regulator, gas bottle etc. The kit contains the following products:
Brewly BWH30L Brewery & Water Heater Kit 1
Brewery 30L with 8,8m chiller. The Brewly BWH30L is an efficient, compact 2500W semi-automatic brewer with adjustable malt basket for efficient sparging, bazooka bottom filter and tap. You mash, blanch and boil in the same vessel - Cooling coil chiller 8,8m included. Via the clear digital display, you can easily set the temperature and time. Can also be used as a sparge water kettle.The malt is placed in a malt basket with a perforated insert that can be easily lifted up with the steel handle in two steps for easy leaching after mashing.Internally, there is a volume level gauge set on the stainless steel wall.Brewly BWH30L Brewery- Material: Polished stainless steel (AISI 304)- Brewing volume: 30 liters (max), at least 20L batches are recommended.- Total volume: 35 litres- Digital Controller with clear display - Set temperature and time.- Temperature range 25°C to 100°C, adjustable in steps of 0.1°C.- Temperature control up to 100°C, with +-1°C accuracy.- Power: 2500W in total (adjustable in 700W and 1800W, or both elements at the same time which gives 2500W). 10-16A fuse is recommended. The heating elements are placed under the base to avoid caramelization of the wort and to reduce burning.- Malt basket with steel handle: Can be raised in several steps.- Maximum recommended malt quantity is 8 kg.- Tap with Bazooka mesh-screen filter (raised Mesh-screen bottom filter for efficient separation of hops from the wort)- Strong glass lid- Height: 67 cm- Diameter: 36 cm (without handle and faucet)- Weight: 10 kg (freight carrying weight 40 kg)- Instruction manual- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).
Brewster Dominator 40L Brewery
The Brewster Dominator 40 from Brewolution is an impressive Display- or App-controlled brewing system packed with innovative features and engineered for optimal brewing efficiency with the ideal dimensions. Its 3000-watt heating element ensures rapid boiling, while the intuitive app provides seamless control. With a 10 kg malt capacity, low watt density, and CIP-ready design, it’s built for ease, precision, and efficiency - perfect for both hobbyists and serious brewers. Premium Quality for the Best Value. Brew from 7L to 35L of beer. Its upgradable to 65L total volume with the Extension Kit. Advanced App Control: Easily monitor and control every aspect of your brewing process remotely with the intuitive Brewster Dominator app. High Brewing Capacity: Brew large batches with ease thanks to the 10 kg malt capacity, perfect for crafting rich, full-bodied beers. Rapid Heating Power: Equipped with a 3000-watt heating element (100-3000W), the system delivers fast and efficient boil times, ensuring quick and precise brewing. Low Watt Density Heating: Prevents scorching and caramelisation by distributing heat evenly, ensuring cleaner, lighter beers and easier cleaning. CIP-Ready for Easy Cleaning: The system is designed for Clean-in-Place (CIP) cleaning, allowing you to effortlessly maintain hygiene between brews. The remaining cool facts about the Brewster Dominator:- High-Quality Stainless Steel: Made from durable AISI 304 stainless steel.- Weight: 13 kg for sturdy and reliable brewing.- Large Malt Surface: Ensures maximum brewing efficiency.- Capacity: Brew up to 35 Liters, with a total capacity of 40 Liters.- Compact Dimensions: 51 cm in height and 40.5 cm in diameter.- Adjustable Heating Element: Power ranges from 100 W to 2500 W in 100 W increments.- Precise Temperature Control: Adjustable from 25°C to 100°C with 0.1°C precision, and a deviation of just ±1°C.- Integrated Circulation: Flow rate is easily adjustable for optimal brewing performance.- Convenient Grain Basket Lifting: Removable handle is compatible with a Ratchet Pulley for effortless grain basket lifting.- Stainless Steel Grain Basket: Also made thicker and from durable AISI 304 stainless steel.- Clear LCD Monitor: Easy-to-read display for convenient operation.- Flexible Control Options: Choose between manual or automatic programming, with alarms and reminders for key steps.- Customisable Brewing Steps: Program up to 9 mashing steps and 9 hop or spice additions.- Intergrated Powerful Magnetic Pump: The 230 V pump with digital control has a capacity of 12 L/min.- Glass Lid: Allows for easy visual monitoring throughout the mashing process.- Minimum Batch Size: Capable of brewing as little as 7 litres.- Quality Tested: Every Brewster Dominator is tested before shipping for reliability.- Spare Parts & Support: Fast and reliable customer service with spare parts available through Brewolution.- Power Supply: 220 V, 50 Hz, 13 amp. Despite its powerful 3000-watt heating element and pump, it remains compatible with a standard home setup.- Weight: 13 kg- Dimensions: 51 cm height, 40.5 cm diameter- Adjustable Temperature: From 25°C to 100°C with a deviation of ±1°C- Magnetic Pump Capacity: 12 L/min- Minimum Batch Size: Capable of brewing as little as 7 litres- Glass Lid: For clear visual monitoring during mashing
Brewster Dominator 25L Extension Kit - Upgrade your Dominator Brewery
Fits both Dominator och Dominator PRO. Upgrade your Brewolution Brewster Dominator to a 65-litre system for bigger batches and bold beers. This setup lets you brew approximately 50 litres of finished beer, and with a 20 kg malt capacity, you can craft larger batches, bolder beers, and have endless possibilities! Premium Quality for the Best Value. Brew approx. 50 L. beer The grain basket can hold an impressive 20 kg of malt Brew 2 x 25 All-Grain-Kits Easily upgrade to a 65-litre brew system Kit includes all you need Easily upgrade the Brewster Dominator 40-litre system to a 65-litre capacity with this extension kit. Premium Quality for the Best Value. This setup allows you to brew approximately 50 litres of finished beer, offering greater flexibility for larger batches. The grain basket can hold an impressive 20 kg of malt, giving you the potential to craft seriously bold, high-gravity beers. Even with a smaller 25-litre batch, you can brew a truly robust beer by using the full 20 kg malt capacity. Brewster Dominator Extension Kit 25 includes:- Boiler Extension 25 L- Grain Basket Extension 47 L- Recirculation Pipe Extension- Sight Glass Extension with Stainless Steel Shield- Silicone Seal for Boiler Extension
Brewly 40L Brewery Kit 2
Brewly 40L Brewery Kit is a affordable kit consisting of Brewly 40L V3 Brewery (with chiller, hop spider, whirlpool & mash paddle) & Brewly 40L Sparge water heater.For specifications, please see the product pages.
PET Keg 20L Kit 1
A complete PET 20L kit Oxebar with, regulator, restrictor tube tap kit and gas bottle included.
Gas Distributor - CO2 Manifold 4-way 1/4" Barb
Gas Manifold - CO2 Manifold 4-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.
Gas Distributor - CO2 Manifold 5-way 1/4" Barb
Gas Manifold - CO2 Manifold 5-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.
Gas Distributor - CO2 Manifold 6-way 1/4" Barb
Gas Manifold - CO2 Manifold 6-Way 1/4" Barb - can be used to connect 6 kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.
Bottle Filler Stainless Steel 35cm with Brush
Bottle filler in stainless steel that fills the bottle from the bottom up. Thanks to the spring-loaded valve at the bottom, the operation is simple: press down on the bottom of the bottle and beer comes, lift up, and it stops flowing. - Food grade stainless steel 304 bottle filler- Stainless steel bottle filling: 10.3 mm hose (inner diameter)- Fits 3/8'' or 5/16'' ID silicone tubing- Highly corrosion resistant interior and exterior - ideal for wet gases- Cylinders work well at low temperatures- Easy to clean and disinfect- Spring-loaded tip for easy filling- Fills bottles from the bottom up- Prevents spillage - Brew during bottling- Includes nylon brush for easy cleaning A removable tip and spring make this model easy to disinfect. the nozzle spring can be removed if you prefer the effect of a springless bottle filler. The package includes:1 pc Stainless Steel Bottle Filler 35cm1 pc Nylon Brush
Diffusion Stone 0,5 microns with 1/2" MPT & 1/4" Barb
Diffusion Stone 0,5 micron pore size with 1/2" MPT & 1/4" Barb. Manage the stone carefully and preferably with gloves so that the pores do not clog up.Material: Stainless steel Barb: 6.5 mm (1/4 ")Thread: 1/2" MPTPore size 0.5 microns (for co2 or for oxygenation with oxygen stub)
Magnetic Stirrer 8W 0-1500 RPM
Easy-to-use magnetic stirrer with good capacity of 1,5 liters (and more). Infinitely variable speed and durable construction that can withstand a little spill.Material: Durable cover.Speed: 0-1500 rpm.Capacity: 1.5 liters.Power supply: 230VMax Power: 8W
Coobra CB5 Pro WIFI 50L Brewery
The new Coobra CB5 Pro WIFI v.5 brewhouse, the latest model with a new built-in pump and improved Wifi control unit, is a complete 50-liter recirculating brewhouse where you mash, leach, boil, and cool in the same vessel. Now with 11-step mashing and memory for up to 10 recipes. With the new control unit, it is also easier to pause, stop and make changes during the mashing process. This new version offers two major improvements: 1. WiFi control unitMounted on the side, allows for up to 11 mash steps and 9 saved recipes via wireless controlLet you remotely monitor and adjust temperature and time from your mobile phone. 2. Perforated malt basketThe inner basket with 2mm holes around the bottom in combination with a swelling plate for even vortex distribution - improves liquid circulation and reduces channel formation.Facilitates leaching and creates more stable flow during pump recirculation. Technical highlights- Capacity: 48L outer vessel, 31L malt basket, max 12kg malt- Power: 3300W (1500+1800W) with PID control and patented anti-burn system- Built-in 220V circulation pump with on/off control- 11m stainless steel cooling coil (11mm), whirlpool function and visible viewing window- Robust control board for stable temperature, glass lid, strong handles, and safety features BenefitsWireless control: Program complex brewing profiles and follow the process remotely.Even recirculation: Perforated basket provides even flow distribution and improved leaching efficiency.Complete functions: All-in-one solution for mashing, leaching, boiling, whirlpool, and cooling with high power and automation. SummaryThe Coobra CB5 Pro v5 takes home brewing to a new level with modern WiFi control and a smart perforated malt basket.It is a powerful and flexible solution for those who want to make precise, repeatable batches with full control both at the brewhouse and remotely. Coobra Craft Brewer 5 PRO• Model No.: CB5 PRO• Capacity: Outer pot (48L)• Inner pot (31L)• Outer pot 48L with brushed surface with 10/15/20/25/30 L water scale onthe body, inner filter pot 31L with 2mm diameter hole filter, inner filter potcan be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn &0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature±1°C and start from 30°C• Whirlpool function• PCB controls two heating elements: 1500W/1800W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channelingandincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 3300W±5%• Box size: tbd
The Home Brewery´s Cider Kit 25L
Make your own cider at home! Contains the equipment needed to brew up to 25L cider. Just add one or more The Home Brewery's Craft Cider Recipe Kit 3L, 6L, 9L, 12L and you are good to go. The Ciderkit can also be used wit your own pressed must, just add cider yeast, caps and bottles. - Fermenter/lagering vessel 25L (30L max) with lid and tap- Fermenter 25L (30L max) with lid (without tap)- Airlock for fermenter- Bottle filler 44cm with 1m hose for tap- Automatic pump siphon 44cm with holder and clamp- Capper- Sanipro Rinse Sanitizer 250mlNOTE: Cider yeast is NOT included.Please note: The cider kit does not contain must, cider yeast or caps. You also need bottles (9pc 33cl per 3L cider) and sugar for the carbonation (or carbonation drops). Bottle in picture is not included.The image shows 12L fermenters, but 25L fermenters are included.
Pump Homebrew 18W 12VDC
Powerful and quiet 10L/min magnetic pump capable of handling water/wort up to 90°C. Perfect for recirculating wort or drinking water.Do not run the pump dry.SpecificationsCapacity: max 10 L/min (60Hz)Head: max 6 meters (60Hz)Power rating: 18WConnections: 1/2" BSP threaded males on both input and output. Includes 1/2" barbs for hoses with ca 8mm inner diameter.Voltage: 12V DC (50-60Hz)Protection: Class BNote: Do not run the pump dry
Pump siphon Stainless Steel 44cm with 1m Hose and Holder
Stainless steel Pump siphon 44cm with 1m hose and holder. Auto siphon. Total Length: 50cm. Hose Inner diameter: 9mm (3/8")
Tap Valve Stainless 1/2" - 3/8" Barb & 1/2’’ NPT Thread
Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet: 3/8" barb (10mm) & 1/2’’ NPT ThreadInlet: 1/2" with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.
Tap Valve Stainless 1/2" - 1/2" Female & 1/2’’ Male Thread
Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet: 1/2" Female ThreadInlet: 1/2" Male Thread with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.
Tap Valve Stainless 1/2" with 3/8" Barb & 1/2’’ Female Thread
Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet: 3/8" barb & 1/2" Male ThreadInlet: 1/2" Female and 1/2" Male Thread and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.
Picnic Party Tap Kit Duo-Bronco EVABarrier 1m
This Picnic party tap kit lowers foaming through its restrictor tubing, and includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.This is the perfect companion for taking small samples from kegs/PET keg bottles. It has enough flow resistance to pour a beer with as little head as possible.1 x KL21821 duo-Bronco / duo-Picnic Party Tap - 6.35mm (1/4') duotight compatible1 x KL37259 duotight - 6.35mm (1/4inch) Joiner1 x KL24235 duotight 6.35mm (1/4) x Ball Lock Disconnect - (Black + Yellow Liquid)1 x 1.5m Cut Length of EVABarrier 3mm x 6.35mmComes fully assembled.
Brewly Red Plastic Pressure Kit
Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer.Brewly Pressure Kit includes:- 2 x Plastic Carbonation Screw Caps with barb- 1 x SS Float & 80cm Silicone Dip TubeThis inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all together.
Digital WiFi Universal Thermostat EOP20 - Control heating and cooling
Wifi Universal thermostat with EU-connections for cooling & heating at the same time and control both manually and via Wifi app. Perfect for home brewing, fermentation breeding, incubation, greenhouse, etc.- Intelligent digital display temperature controlled outlets- Temperature range -30 - 105 ℃- Supports both Celcius and Fahrenheit- WiFi 2.4GHz wireless connection- Mobile Smartlife APP control- Manual control or app controlled.- Double relay output: connect cooling & heating at the same time- automatic alarm for high/low temperature- temperature peak, Update once in 1s- Heating/cooling mode- temperature unit conversion- Programmable in up to 7 day intervals- compressor delay protection.- Temperature sensor with 150cm cord and suction cup for fastening.
Magnetic Pump MP-15 Grey Stainless Steel Head
Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15 Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" NPT threaded males on both input and output (NPT/FPT)Voltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry. Color may vary.