Bottling

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x33,9 mm (each label)- 24 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. NOTE: No round edges on the labels.Specification- 99,1x33,9 mm (each label)- 16 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1600 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 210x148 mm (each label)- 2 label per A4 sheet- Total 100 pcs A4 sheets- Total 200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Crown Caps 75-pack White 26mm

29 mm crown caps (crown corks) for champagne and geuze bottles. Looks may vary.

iTap Red Silicone Seal for Handle (item 24). Spare part.

Robust cardboard bottle box with 12 Belge beer bottles of 75 cl. For 26mm crown caps/corks. The box dividers protect the bottles from breakage. Use this handy box to store your artisan creations. stackable boxreusable and recyclableless chance of breakage due to individual compartmentswith carry handles for your convenienceBottle closure (not included): 26mm crown caps (crown corks) Dimensions and weight per bottle:Weight0.56 kgHeight29.7 cmWidth7.5 cm

Crown Caps 26mm. Oxygen Scavenging which means less oxidation.

Crown Caps 26mm. Oxygen Scavenging which means less oxidation.

Crown Caps 26mm

Crown Caps 26mm. Oxygen Scavenging which means less oxidation.

Crown Caps 26mm

Crown Caps 26mm in 250-pack. Many different colors and designs to choose from.

Grifo Super Corona a professional, very powerful and stepless cap applicator in a bench model with a weight of 8.8 kg. Made of steel and cast iron. It is continuously adjustable in height up to the maximum height in order to be easily adapted to the height of all bottles. Encapsulation heads for both 26mm crown caps are included.Height: 51 cmWeight: 8.8 kgMaterials: Steel and cast iron

BeerGun V1 with comfortable pistol grip is used for bottling carbonated beer directly from barrel to bottle. Fills from the bottom with minimal foam and the pressure is automatically reduced without the flow becoming turbulent and causing foaming. Contains hose and nipple 1/4 "MPT - 1/4" MFL. Connect your drum to the T-coupling for gas, from there to the carbon dioxide tube at one end and the beergun at the other. Use reinforced carbon dioxide hose. Put your beergun in the bottle and press off. The bottle fills smoothly without turbulence or foaming. Complete with ball coupling or bayonet for beer connection, and with gas connection (T-coupling 1/4 '' and eg reinforced plastic hose 6mm with hose clamps, or PE hose 3/8 '' hose with JG 3/8 "- 3 / 8 "- 3/8" T-coupling)

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.

With this stainless steel counter pressure filler, you can pour beer and other beverages directly into bottles from kegs without foaming, exposure to oxygen and loss of carbon dioxide. Fits most types of bottles. Duotight compatible.The bottles are filled from the bottom in an oxygen-poor environment because carbon dioxide builds up a back pressure in the bottle before the beer is released. Works best with cold liquid and with a pressure between 0.6 - 1.1 bar.For cleaning, use an alkaline cleaner (PBW or Chemipro OXI) and flush the bottle filler according to CIP (Clean In Place), then rinse through the back pressure filler with water.Then use a disinfectant (Sanipro or Star San) before use.Connect the CO2 hose from the regulator on one side and the beer hose on the other side.Back pressure filler for bottles- Hose nipple size: 5.5 mm on both nipples.- Bottle size: at least 22 cm high with a bottle neck diameter of 14-20 mm (for taller bottles, the range of the back pressure filler can be extended with a piece of hose).- Main valve with three positions: Co2 IN - switched off - beer IN.- Silicone plug 22/17 mm included.- Manufacturer: KeglandInstructions:Click here

A removable clamp-lock is designed for dispensing drinks into the glass bottles with crown corks of diameter size 1.02 in, for iTap and iTap 2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

This clamp-lock is designed for dispensing drinks into the Belgian style 75cl bottles with 29mm crown caps.  Fits all iTap and iTap2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

A removable clamp-lock is designed for dispensing drinks into the glass bottles and growlers with a swing top, for iTap and iTap 2 devices.- Fits all iTap dispensing systems- Fast dispensing into glass growlers and swing top bottles- Minimal drainage losses (1%)- A quick switch from one clamp lock to another- Equipment costs minimization: use the same iTap for different bottles and growlers- Made of high-quality food-grade materials- No disposable parts- Easy to use, quick to set up- Warranty service- The best ratio of price vs quality

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2.

The handle adaptor is installed instead of an original iTap handle, then a customised handle is installed on it.

Double iTap draft beer tower- For 2 iTap dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap2 draft beer tower- For 2 iTap2 dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap2 draft beer tower- For 2 iTap2 dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap draft beer tower- For 2 iTap dispensers- Holes to hide all the tubes and hoses- Professional look

Kegland has created the world's smallest digital manometer (gauge) with a backlit screen. It is robust, very accurate and has a long battery life (the battery lasts for several years if it is only read once a day). The pressure gauge can display the pressure in units such as PSI, KPA and BAR. It can measure pressures up to 6.2 bar (90 psi). It is perfect for Inline Regulator, Blowtie2 and Mini 360 Core Actuator Regulator.To display the pressure value, press the red button. To turn on the backlight, hold down the yellow button. To select device, press the yellow button several times. The screen turns off automatically after 15 seconds to save battery. Please note that the pressure gauge is only intended for gas and must not be exposed to liquid. Always use a check valve if there is a risk of backflow to the regulator.Specifications:Accuracy: +/- 1% at 20°C< br />Battery: CR2032 (included)Battery time: Over 2 years when reading once per day.Size: 27 mm x 27 mmDimensions of coupling: Ø 7.8 mm (5/16") with O-ring.

This blow gun is easy to use to replace the air in fermenters, kegs or bottles with CO2 before they need to be refilled. Carbon dioxide is heavier than oxygen, which means that the oxygen is displaced and the risk of oxidation of the beer is reduced. The blowgun fits directly onto a 425g SodaStream-type carbonation cartridge without an additional adapter. Press the trigger to blow CO2 from the carbonation tube. Fits 3/8" hose. It can also be used instead of a regulator in a draft beer plant. The gun has a safety valve that triggers at 1 bar. This is a good serving pressure for most types of beer. When the safety valve beeps, you know that the pressure in the barrel is 1 bar.Please note that the gas tube, hose and barrel coupling are not included.

Carbonation Drops are a convenient alternative to priming sugar. The dosage required is 1 drop per 330-375 ml bottle or 2 drops per 740-750 ml bottle. Each bag contains at least 60 tablets, which corresponds to approx. 3g of sugar/tablet.Advantages:- Simple dosing- Solved quickly- No mess- No measurement- No spillageDosage suggestions for common bottle sizes:1 tablet for 330-375 ml bottles1.5 tablets to 500 ml bottles2 tablets for 740-750 ml bottlesIngredients:Cane sugar (sucrose), dextrose (glucose).

Better Brew Industrial Floor/Bench Wine Bottle Corker. For wine corks up to 26mm.

Better Brew S30 Bottle Filler Extender - extender for the S30 bottler.

Brewly Corker Twin Lever - Wine Bottle Corker. Corking wine bottles doesn't get any easier. This is a superbly made item. Put in a cork - Put the twin level corker on the bottle and press down. Job done! Built to last, you'll past this down to your kids.

iTap2X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or a PET bottle safely without problems. And with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for 28mm PET bottles. 3/8" barbs for liquid, gas and drain. Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useBest ratio of price vs quality

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x37 mm (each label)- 16 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1600 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x148 mm (each label)- 4 labels per A4 sheet- Total 100 pcs A4 sheets- Total 400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x143,5 mm (each label)- 2 labels per A4 sheet- Total 100 pcs A4 sheets- Total 200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x289,2 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 210x297 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 52,5x29,7 mm (each label)- 40 labels per A4 sheet- Total 100 pcs A4 sheet- Total 4000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x36mm (each label)- 24 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x57 mm (each label)- 10 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x48 mm (each label)- 12 labels per A4 sheet- Total 100 pcs A4 sheets- Total 1200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Round corners.Specification- 38,1x21,2 mm (each label)- 65 labels per A4 sheet- Total 100 pcs A4 sheet- Total 6500 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x25,4mm (each label)- 33 labels per A4 sheet- Total 100 pcs A4 sheet- Total 3300 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x41mm (each label)- 21 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x46,6 mm (each label)- 18 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1800 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Bottle filler 44cm without end piece, so you can attach a hose to it.Length: 44cmTube diameter: 10mm