Equipment

Silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 65 mmDiameter Bottom: 55 mmHeight: 38 mmHole: 9 mm

Heat insulation for the Brewly 40L V2 brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.NOTE: Made for Brewly V2 40L. Will not fit perfectly on V3.

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 18cm. Diameter: 7cm. Mesh size: 300 microns

The Duotight Flow Stopper - Automatic Keg Filler (KL09393) is an fantastic device designed to streamline the keg filling process for homebrewers. This product,  offers a hassle-free method of filling kegs, or transferring between kegs during filtering or after fining. It is particularly useful because it attaches to the gas post of your keg and automatically cuts off the flow once the keg is full, thus preventing overfilling and spillage of beer. Some of its key features include compatibility with Duotight fittings, ensuring a secure and leak-free connection, and the ability to work with a BlowTie spunding valve. When used with the BlowTie, it allows you to apply head pressure to the keg, enabling control over the flow speed and reducing foam during the filling process.For this setup, a short length of 8 mm OD EVABarrier tubing is required to connect the BlowTie to the outlet of the Flow Stopper. This flow stopper includes:2 x duotight 5/8" thread x 8mm pushfit (for hose)1 x duotight Elbow pushfit 8mm1 x duotight straight 8mm pushfit x 7/16" thread for threaded ball lock1 x ball float1 x stainless spring1 x acrylic sight glass (with 5/8 male thread on either side)*Colours of the floating ball and joiners may vary. You need to buy a ball lock with a thred if you do not have one. 

The filter prevents hop residue etc from beeing sucked up into a hose, use in kegs, fermenters etc (not with float). Made from HDPE and 304 Grade stainless steel mesh this product can be boiled or sanitized with most detergents.The float can be mounted in three different places on the filter, to determine how close to the surface you want to suck up liquid.Dimensions: 40 x 28 mm. Hose holder diameter: 8 mm, perfect for 6mm inner diameter silicone tube/hose. Materials: Stainless steel 300 mesh and plastic. NOTE: dont use with float as there are no attachments for float on the filter

Fluidfit HUY1/2-1/2G Y-connector Female 1/2" (12,5mm). Beer or Gas. Pushfit

Without Chiller. The G30v3 is an all-grain brewing system with a 30L (8 US Gal) capacity, designed to make up to 40 pints (23L or 6 US Gal) of high-quality beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced brewers.Features- Sleek 304 grade stainless steel body- Manage your brew day from your mobile device via Bluetooth using the Grainfather App- Get a more reliable connection between your G30v3 controller and the Grainfather App on your smartphone with the GCAST Bluetooth Wi-Fi Bridge- A robust magnetic drive pump for maximum brewing efficiencies- NEW perforated grain basket negates the need for a top plate or additional pipework (up to 9kg malt)- NEW auto reset switch avoids the need to get underneath the unit should an unexpected trip occur- Unlock distilling capabilities with the Still Spirits Alembic Dome & Condenser- Backed by a 3-year warranty- EU-version power cord (UK power cord NOT included).SIZE:685 x 386mm (27 x 15’’)WEIGHT:14.6kg (32lb)MAX PREBOIL VOLUME:30L (8 US Gal)BATCH VOLUME:Max: 25L (7 US Gal)Min: 10L (3 US Gal) GRAIN BILL:Max: 8kg (18lb)*Min: 1.5kg (3.3lb)*9kg (20lb) with top plate POWER:2000W, 220VCONNECTIVITY:Bluetooth ControlInstructionsClick here

Brewly 40L Brewery Kit is a affordable kit consisting of Brewly 40L V3 Brewery (with chiller, hop spider, whirlpool & mash paddle) & Brewly 40L Sparge water heater.For specifications, please see the product pages.

Brewly Recirculation Hook Stainless Steel. Perfect for those who want to recirculate in a brewery or other with, for example, an external pump. Fits 10mm and 12mm silicone hose. Stiffer hoses should have 12mm inner diameter to fit. Outer diameter: 12 mmInner diameter 10 mmMaterial: Stainless steel

Connector Threaded Stainless 3/8" Female - 1/2" Male BSP. Stainless Steel.

Stainless steel Mesh filter screen for Bazooka 15cm. NOTE! No couplings included, only net/mesh. Fits well on 1/2" thread/pipe with hose clamp (not included). Length: 15 cm (6")Diameter filter: approx. 22 mmMesh size: ca 0,5mm (fine)

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this BLUE coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Feeler Gauge with 17 blades - Used to check the distances between the rollers in a malt crusher, or distances on other devices. The leaves are 9 cm long and combined to achieve the desired thickness. For example: 1.00 mm + 0.30 mm to measure and opening of 1.3 mm. The blades can be lubricated with thin protective oil from the factory. If necessary, dry it a little before use.Material: carbon steel (carbon steel).  The thickness of the 17 blades: 0.02 mm0.03 mm0.04 mm0.05 mm0.06 mm0.07 mm0.08 mm0.09 mm0.10 mm0.15 mm0.20 mm0.25 mm0.30 mm0.40 mm0.50 mm0.75 mm1.00 mm

Quick Swivel Connector from 1/2" NPT Female to 3/8" (9.5 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Quick Swivel Connector from 1/2" NPT Female to 5/16" (8 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Ball coupling with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 9,5mm outer diameter.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C.Outer diameter: 1/2" (12.7mm)Inner diameter: 3/8" (9,5mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Tap Adaptor Duotight - 9.5mm (3/8”) Pushfit x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Achieve quick and fast gravity readings of your homebrewing in three specific scales at high ranges, SG Sugar, BRIX and SG Wort. Getting fast, accurate, and reliable readings during all-grain brewing is essential to getting the best possible efficiencies. Refractometers help you achieve this and can speed up your brew day significantly. Now in a water-resistant design that is rechargeable! This model also features ATC (automatic temperature compensation). This high-quality refractometer is extremely accurate and easy to use and calibrate. Calibration is simply done with a few drops of distilled water and the use of a flat head screwdriver. Comes with:Carry caseRed Magnetic Charging USB Charging Cable (AU plug not included) Calibrate Steps:1. Add 10 drops of clean filtered water (preferably deionised water) to the refracted sample end of your Refractometer. 2. Either in direct sunlight or using the LED, observe the blue shaded area. Does it read 1.000? If it is higher or lower, you will need to use a flat headed screwdriver and adjust the underside of the Saber Refractometer so that it reads 1.000.

Charge your Pill wirelessly with this easy-to-install upgrade kit from KegLand. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud. No need to take your RAPT Pill housing apart for charging! Or even to connect to the RAPT Captive Portal. Includes:1 x USB-C Wireless Charging Coil2 x Adhesive Weight Pads1 x USB-A to USB-C cord (AU power plug not supplied)1 x Black RAPT Wireless Charging Dock (USB-C)If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).See video below how to update your Pill:

The Mashing Head is an innovative tool designed to optimise your brewing process. From ensuring even flow and stable temperatures to maximising sugar extraction and minimising oxygenation, it delivers consistent results for superior beer quality.Perfect for Silicone Hose with 12-13mm internal diameter. Key Benefits of the Mashing Head- Even Flow Distribution:Eliminates channeling by ensuring water and wort flow evenly through the grain bed, improving mash efficiency and consistency.- Optimised Sugar Extraction:Promotes uniform liquid distribution, helping you maximise fermentable sugar extraction for a higher-quality wort.- Temperature Stability:Prevents hot and cold spots during mashing, ensuring consistent heating for optimal enzymatic activity.- Reduced Oxygenation Risk:Minimises splashing to reduce oxygen exposure, preserving the wort's flavour stability and overall beer quality. Compatibility and IntegrationThe Mashing Head is designed for seamless integration with your existing brewing system, offering a straightforward and hassle-free upgrade. It is compatible with systems like the Brewster Dominator, and any brew system where the sparge arm directs flow straight down and features a silicone tube with an internal diameter of 13 mm. For added versatility, the Mashing Head can also be used with the silicone tube from the CIP Spinning Spray Rotor Low Volume, providing even more installation options. This design ensures that the Mashing Head fits effortlessly into a wide range of setups, making it a valuable addition to any brewer’s toolkit. Effective Mashing and Avoiding Oxygenation RiskFor the best results, ensure the wort completely covers the grain bed, maintaining approximately 2–3 cm of liquid above the grains. This practice ensures consistent liquid flow, helping to evenly extract fermentable sugars and optimise mash efficiency. Additionally, it minimises splashing, which reduces the risk of oxygenation during the mash process. Controlled flow and proper coverage not only enhance mashing performance but also preserve the wort's flavour stability, resulting in higher-quality beer. By following these steps, you can ensure your mash process is efficient and your beer's taste remains uncompromised.

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or alternatively be able to attach to a Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor.  The combination of the two fittings prevents the tap spinning around while in use. Note: kit contains no Nukatap or ball lock disconnect.

A complete PET 20L kit Oxebar with, regulator, restrictor tube tap kit and gas bottle included.

This plug can stop the flow permanently or temporarily in a fluidfit, pushfit, duotight or JG-connector. Gas or liquid.

This plug can stop the flow permanently or temporarily in a fluidfit, pushfit, duotight or JG-connector. Gas or liquid.

This plug can stop the flow permanently or temporarily in a fluidfit, pushfit, duotight or JG-connector. Gas or liquid.

Gas Manifold - CO2 Manifold 2-Way 1/4" Barb - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 3-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Fluidfit® HCF 1/2" push-fit connection with female 1/2" BSPP thread.

Fluidfit® HCF 1/4" push-fit connection with female 3/4" BSP thread.

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Gas Manifold - CO2 Manifold 3-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

29 mm crown caps (crown corks) for champagne and geuze bottles. Looks may vary.

Connector Nut in Stainless Steel with 5/16" Barb and 1/4" FFL/MFL Thread (fits ball lock disconnects 7/16" UNF). Stainless Steel.

Tap hygiene plug with brush. A great tool to keep your beer taps hygienic and clean. The durable brush keeps fruit flies away from beer taps by removing anything that might attract them. This tool keeps your beer tasting fresh and consistent by removing yeast and sediment. The step-by-step design ensures it fits all tap sizes. The hole in the handle allows the plugs to be chained together so they are ready to go. The plug also fits some bottles. Durable brush that keeps taps clean of sediment and yeast for a fresher, better tasting drink. Features:Keep your beer protected! Use the plug to protect your beer taps from fruit flies, insects and other contaminants. Durable brushes keep taps clean of sediment and yeast for a fresher, better tasting beer! Specially designed to fit most beer taps. Perfect for overnight use in bars and restaurants. Chained together for easy storage. Usage:1. Insert it into the valve tap.2. Remove it from the tap.3. It works as a remover and cleaner. Dimensions:Total length: about 6 cmBrush length: about 2.3 cm

Hose Clam Butterfly Stainless Steel, adjustable 19-29mm with plastic butterfly thumb screw. Yellow - Color may vary.

Hose Clam Butterfly Stainless Steel, adjustable 18-32mm with plastic butterfly thumb screw. Yellow - Color may vary.

2” tri-clamp Cap and will fit any 2" tri-clamp connection Tri-clamp fittings, including the 2” cap, are celebrated for their quick clamp union, creating sanitary connections that are easy to assemble and disassemble. This feature significantly enhances the efficiency of your cleaning and maintenance processes, a key factor in producing high-quality craft beers. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard.

iTap Red Silicone Seal for Handle (item 24). Spare part.

Powerful and quiet 10L/min magnetic pump capable of handling water/wort up to 90°C. Perfect for recirculating wort or drinking water.Do not run the pump dry.SpecificationsCapacity: max 10 L/min (60Hz)Head: max 6 meters (60Hz)Power rating: 18WConnections: 1/2" BSP threaded males on both input and output. Includes 1/2" barbs for hoses with ca 8mm inner diameter.Voltage: 12V DC (50-60Hz)Protection: Class BNote: Do not run the pump dry

Tap Faucet with short handle, adjustable flow, and Ball lock connector (included), and the G5/8" connector. 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. You can use this lever to adjust the flow rate of beer to avoid excess foam. This is especially useful for hard-to-pour beers, if you’re serving a wide variety of styles, using frosty mugs, or serving sampler glasses. Connect it directly to a beer or soda keg .Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap). Directly use the liquid ball lock post on the corny keg.

Stainless Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid/beer post. Threads: 1/4" MFL (corresponds to 7/16" UNF). Stainless Steel 304.

Stainless steel counter-flow chiller cools the wort by running cold water counter-currently in a hose around a stainless steel tube with the wort.solids. The wort loop connectors are approximately 9.5 mm (3/8") outer diameter and fits 3/8" john guest/duotight/pushfit or hose with hose clamp. And the cold water loop has nipples approximately 10mm in diameter. These can be used with gravity but are recommended to be used with a pump. This includes:- Counter Flow Chiller 10m

Bucket Lid Opener Yellow is made from durable plastic and used to open lids on many types of bucket lids.

This cylindrical nylon brewing bag (BIAB, Brew-In-A-Bag, mash bag, filter bag) with circular ribs fits well in pots and pans with a diameter of less than 24cm. Mesh size (mesh): 30. Nylon is stronger than polyester, which many other brewing bags are made of. When you mash, the brewing bag encloses the malt so that it can be easily lifted up and leached out afterwards. Can also be used as a hop boiling bag, however, the bag must never touch the hot bottom of the kettle/brewery. SizeDiameter (cylinder): 24 cmLength (height/depth): 35 cm MaterialStrong, durable and coarse-mesh nylon, easy to clean. BPA-free. Note: Kettle is not included.

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  3/8" barb (10mm) & 1/2’’ NPT ThreadInlet: 1/2" with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.