Equipment

The Milwaukee MI56P is the replacement pH/temperature probe (electrode) for the pH55 PRO and pH56 PRO Testers (sold separately). The MI56P probe measures pH and temperature and easily slides into the tester fitting then screws into the meter body for secure installation.

The Grainfather G30 Storage Bag is made of strong nylon that keeps your Grainfather free from dust and moisture from the environment.Just as it is important to clean your G30 between each brew, it is also good to store it safely.Put the bag on the floor, place your G30 on the bottom of the bag, thread it over and close.Height – 100cm (39”)Diameter – 45 cm (17”)Material – Synthetic (Nylon)

Mix and store a wide range of culture mediums with these glass reagent bottles. Pyrex™ Borosilicate Glass Reagent Bottles with Polypropylene Cap and Pouring Ring feature a high chemical resistance and are designed with sloped shoulders for smooth pouring.- Bottles complete with polypropylene cap and drip-free pouring ring- Complies with ISO 4796- Printed with Trace Code for downloadable batch certificate- Sloping shoulders for smooth pouring action- White graduations and marking spot- Manufactured from temperature and chemically resistant borosilicate glass- For use up to 140°C- Made in Great BritainPyrex Media Bottle 500mlVolume: 500 mlDiameter: 86 mmHeight: 176 mmThread size: 45 mm

The heat pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. To be placed under the fermenter. Suitable for fermentation in cold areas such as in a refrigerator or in the basement, garages or on the balcony. Provides a low constant heat to the fermenter which aids yeast activity and helps avoid stuck fermentations.Use preferrably in cojunction with an Universal Thermostat (not included).Features:- Inexpensive to run. - Voltage: 220-240V EU-version power cord (UK power cord NOT included).- Power: 25W- Width: 32 cm- Length: 32 cm

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a flexible 5-8 mm inner diameter silicon hose (not included). Instructions:https://www.grainfather.com/media/wysiwyg/V2_GF_WORTOMETER_INST_WEB.pdf

Standard lid for cornelius kegs with Pressure Release Valve (PRV) and o-ring. Oval.

OxyTurbo Single Regulator 2-clocks

White Thread Seal 15mm wide and 12 meters on the roll.

Isolation Jacket for Cornelius Keg 18-19L. Neoprene. Height 43cm. Also works on 23L but doesnt cover them entirely.Note: Cornelius keg is not included.

The filter is designed to work more efficiently and suck more wort up so you will leave less wort behind in the boiler.The part that connects the filter to the boiler is also made of silicone and means if you bump it with your paddle when stirring it is flexible and won't come off. Can be disassembled for easy cleaning.Spare part number 14 on the anatomy chart for the Grainfather.

OxyTurbo Single Regulator (1 clock)

If you have damaged or misplaced your seals, you can purchase them here.

Grainfather Pump Tubes & Fixing Rings Replacement kit. Top/Bottom Pump Silicone Tubes (2pcs) with Fixing Rings (4pcs). 5, 6 and 15 in the Grainfather anatomy picture.

Compact magnetic stirrer machine with adjustable speed 0-3600 RPM. Perfect as a yeast starter and propagation of your yeast, up to 3 liters. Power 3W, adaptor with EU-outlet included (12VDC/220V, 1.2m cord). 1pc Magnetic Stir Bar included.Measurements: 12x12cm and 3,2cm heigh.

Handcraft Supplies 25 L Stainless Steel Conical Fermenter is a high quality stainless steel fermenter which can be used to ferment up to 23 L of wine, beer, cider, and spirit washes. The Stainless Steel Conical Fermenter provides the perfect step up from plastic with the following features: 304 stainless steel build which is long-lasting, robust, and durable. It also makes cleaning and sanitising easier, which reduces the chance of off-flavours.Zero air-permeability walls and a lid with an air-tight silicone seal for reduced risk of oxidation or unwanted microbes entering your fermentation.Coned bottom for efficient trub collection, reducing the contact area with the yeast bed and the off flavours associated with sitting on dead yeast for too long (yeast autolysis).Rotating dip tube with ball valve tap for maximum and easy transfer, removing the need to syphon.Bung, airlock, thermometer strip also included for even greater value for money.  Whats included :  Stainless Steel Fermenter (25 L Capacity)Stainless Steel Fermenter LidThermometer StripAirlockBungValve & Dip Tube Assembly

Now with Tri-Clover Clamp for easy assembly and disassembly of the conical tank, Butterfly valve and harvesting container. No more difficult and complicated Butterfly valve. Now it is easy and simple to mount Butterfly valve with the Tri-Clover Clamp. See video below.FermZilla revolutionary design simplifies the home brewing process and minimizes the risks of infection and oxidation. Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer. You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the optional pressure kit and the additional pressure release valve with gauge.Facts:27 L. Conical tankWorking pressure: 2.4 bar (35 psi)FermZilla Tri-Conical Starter kit Gen-3 - 27 L. contains:1 x 27 L. Conical tank with metal neck ring1 x Butterfly valve with Tri-Clover Clamps1 x 3" Tri-Clover Clamp1 x 2" Tri-Clover Clam1 x Reinforced stainless steel frame1 x Lidt with red pressure release valve 2,4 bar/35 psi, 2 x Male Cap Threads, with caps and the possibility to drill 4 ports for accessories1 x  600 ml yeast harvesting container with 2 x Male Cap Threads and caps.1 x Airlock1 x Stainless Steel Handle Assembly1 x Strip Stick On Thermometer1 x Level indicator sticker (Litres and Gallons)1 x Spare O-RingDo not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.Warnings:Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.Do not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.

Better Brew Crown Caps 40-pack White 26mm

Ferment your beer in stainless conical fermeters just like in professional breweries. Built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice. Build-in thermowell for external temperature sensor probe, for example from a thermostat controlling a pump. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 30L, optimally 20-25L.Brewly CCF 30L Conical Cooling Fermenter with Chiller- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 30L capacity (32L to edge)- 4,7m built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice.- 30cm stainless thermowell for external temperature sensor probe, for example from a thermostat controlling a pump (like Brewly AC-211/TC-320 universal thermostats).- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 1/2" stainless steel valve, perfect for yeast dumping and easy cleaning.- Internal volume scale up to 30L- 2 steady stainless steel handles- 3 adjustable legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 33,5cm- Height without airlock: 59 cm, adjustable up to 66cm- Height with airlock: 69 cm, adjustable up to76cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Heat insulation for the Brewly BWH30L brewery & water heater. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Coobra CB3 PRO, latest version, is a complete 30L recircularing (RIMS) brewery with 11-step mashing digital controller and 10 recipe memory. New powerful 220V-pump. Gardena-attachments on the cooling spiral, and a whirlpool function. You mash, sparge, boil and cool in the same brewery. With cooling wort spiral.Coobra CB3 PRO v5 Brewery• Produkt: Coobra Craft Brewer 3 PRO• Model No.: CB3 PRO• Capacity: Outer pot (32.7L)• Outer pot 35L with brushed surface with 10/15/20/25/30 L water scale on the body, inner filter pot 26L with 2mm diameter hole filter, inner filter pot can be hanged on or put in the outer urn for brewing the mash• 304 stainless steel top cover & heating base, 0.5mm thick outer urn & 0.4mm thick inner filter pot, 201 SS bottom plate cover• Direct water temperature sensor shows the actural water temperature ±1℃ and start from 30℃• PCB controls two heating elements: 1500W/1000W• Movable digital display screen manually controls optional power.• Air grids are made for ventilation of the heating area• Build in 220V pump is for circulating the wort with on/off switch control.• PCB supplys 220V to the pump• Tempered glass lid• Patent anti burning system• Strong metal handles for safety carry• Non-trip 304 stainless steel water tap with the strainer• 304 stainless steel wort chiller with 12mm diameter• Auto overtemp cutout and overheat proctection for safety and reliable use• Replaceable element makes unit easy to clean.• Visiable power cord length is not less than 1.3M• The screen plate distributes the wort, reduces risk of mash channeling andincreases brew efficiency.• Voltage: 220V~240V / 50~60Hz• Max power 2500W±5%• Size: Ø 30 x 63 cm• Weight: 6.20kg• Box size: tbd

Brewly 70L Brewery Kit is a affordable kit consisting of Brewly 70L Brewery (chiller, hop spider, whirlpool, mash paddle) & Brewly 40L sparge water heater.For more information, please see each product page.NOTE: Video shows Brewly V2 brewery.

Fermzilla chiller. Provides the possibility of temperature control during fermentation using, for example, glycol coolers. Of course, the spiral also fits in other vessels with sufficiently large opening. Are installed by drilling two 22 mm holes in the lid. It is attached using the supplied Duotight bushings. The tube dimension is compatible with 3/8 "(9.5 mm) quick couplings. The length can be reduced by means of a pipe cap. See proposed accessories below.

Stackable bottle stand / drying stand with up to 25/16 bottles per layer. can be expanded and stacked in up to 7 layers. Made in food-approved plastic.

Fercubator-Ferminator expansion module

Crown Caps 75-pack Black 26mm

Ferment your beer in stainless conical fermeters just like in professional breweries. Built-in 13-meter stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice. Build-in thermowell for external temperature sensor probe, for example from a thermostat controlling a pump. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 60L, optimally 25-55L.Brewly CCF 60L Conical Cooling Fermenter with Chiller- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 60L capacity (62L to edge)- 13-meter built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice.- 30cm stainless thermowell for external temperature sensor probe, for example from a thermostat controlling a pump (like Brewly AC-211/TC-320 universal thermostats).- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" with rotary racking arm with dip tube provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 3/4" stainless steel valve, perfect for yeast dumping and easy cleaning.- 2 steady stainless steel handles- 3 legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 47 cm- Height: 70 cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Lauter-Helix 1000mm is a stainless steel , flexible spiral filter tube made to filter the vort from hops and debris between brewery/kettle and fermenter. Easy to clean by hnd or dish washer. Fitting: NPT 1/2".Can replace the bazooka filter in Coobra CB3 and CB5 together with a "Hexagon double nipple connector NPT 1/2" to NPT 1/2" which is sold seperately. May also fit other breweries.

The Cannular is a Semi-Auto Pro Model that makes canning easier. Now you don't even have to pull a lever back and forth to seam the can. The seaming process takes only 3 Seconds!  That's crazy fast. No spacers are needed for different cans. NOTE: CDL 202 can lids Only.In its standard design the Cannular Semi-Auto can handle 33 cl and 50 cl aluminium cans with can ends type CDL 202. Whether you're a cool bar wanting to fill your own crowlers or you are a home brewer wanting to keep your home brew fresh and protected from damaging light, the Cannular is the answer.  The Cannular can seamer is one of the most compact and easy to use benchtop can seamers around.  With a single operator you can seam/seal the cans in 3 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs.Semi-Auto DesignThis new Semi-Auto Model of can seamer is able to guarantee you get a consistent seaming process every time. Unlike our less expensive manual can seamer this machine has no lever meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Once the machine is tuned only a small amount of oil on the bearings is required and no other maintenance for 50,000 cans.  Safe To Use with Low Voltage Power SupplyIf you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans.  As a result, we have made the Cannular machine with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself.  This also makes the machine easier to clean and wash down.Environmentally FriendlyWhen compared with disposable glass bottles cans are much more environmentally friendly as they are:* Significantly lighter making them less energy-consuming to transport* More recyclable, more cost-effective to recycle, and a higher percentage of cans get recycled in Australia when compared with glassGreat For Outdoor EventsCans are a fantastic choice for outdoor events, parties, pool events, or at the beach.  Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.Preserve the Products Quality and FreshnessGas Barrier - Although a glass bottle is completely airtight, the crown seals allows a small migration of CO2 out of the beverage and allows small amounts of oxygen to get ingress as the rubber seal is permeable.  So as a packaging solution glass bottles are imperfect and the product quality will degrade more rapidly due to this gas migration. Aluminium cans have a hermetic metal on metal seal that is impervious to gas transmission.Light Block - Many beverages especially beer can get damaged quickly due to light.  If you expose many beers to sunlight for even 5 minutes the beer can become light damaged ("skunked").  Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours.  So unless you keep your glass bottles in the dark all the time you will compromise the beer quality.  Aluminium cans solve this problem by blocking 100% of damaging light.InfoMotor: 24V(DC). AC adapter included (Anderson plug type 40A).Powered by: 220 - 240 V (AC) / 50 - 60 HzRotational speed: over 3300 rpmHeight adjustment: 60 - 200 mm, (no need to use different spacers for different can heights)Size:355 mm deep230 mm wide495 mm heighWeight: 28 kg

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 3/16" (4,8 mm)Inner diameter: 3,2 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Fluidfit® HCF-UNF push-fit connection connection with female 1/4" thread UNF - connector adaptor. For 3/8" hose. N1/4" and 3/8" pushfit.

Hose cutting tool 3-12mm. Perfect for getting straight cuts when cutting hose to push-fit connections.

Spanner set to easily dimantle all PushFit/JohnGuest™ -fittings

Stainless steel quick disconnect with a silicone o-ring. Female QD to 1/2" MPT (male pipe thread). The QD Quick Disconnects grips similar to a ball lock keg coupler. Simply press the spring band on the female fitting and push in the male fitting. When you release the band, the fittings locks together and seal against internal o-ring.Can be used with hot or cold liquids up to 4 bar.

Stainless steel quick disconnect with a silicone o-ring. Male QD to 1/2" MPT (male pipe thread). The QD Quick Disconnects grips similar to a ball lock keg coupler. Simply press the spring band on the female fitting and push in the male fitting. When you release the band, the fittings locks together and seal against internal o-ring.Can be used with hot or cold liquids up to 4 bar.

Coupling 1/2" MPT - 12 mm Barb. Stainless Steel.

iTap2X is the chameleon of the beer taps where you either fill your glass with fresh beer or countertryweights a bottle safe without problems and with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useWarranty serviceBest ratio of price vs quality

A removable clamp-lock is designed for dispensing drinks into the champagne bottles, for iTap and iTap 2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various - bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2 (and all X models).

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. The keg is used with a separate tap with carbonation capsule. The beer shelf life is several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.

Small keg with quick-connectors for gas and beer. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 10 liters Height: 49 cm (54,5 cm incl. quick connector valve) Diameter: 17.5 cm Weight: 1950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 5 liters Height: 28 cm (33,5 cm incl. quick connector valve) Diameter: 17,5 cm Weight: 1280 g Manufacturer: Mangrove Jack's

Diffusion stone with 1/4" barb and 2 microns pore size. For CO2 or for oxygenation with oxygen stubMaterial: Stainless steel Nipple: 6.5 mm (1/4 ") Pore size 2 microns (for co2 or for oxygenation with oxygen stub) Manage the stone carefully and preferably with gloves so that the pores do not clog up.

Adapter for 8g CO2 cartridge for siphons

Bomex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Borosilicate glass. Ideal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.Bomex Wide-Neck Erlenmeyer Flask 500mlVolume: 500 ml.Height: 185 mm.Diameter bottom: 105 mm.Diameter neck (inside): ca 34 mm.

Half-liter measuring jug graduated in deciliter, made in durable SAN-plastic. The measure also has grams scales for flour, rice and sugar. Volume: 0,5 liters. Dimensions: Diameter 11 cm, height 11 cm. Material: Glass and impact resistant SAN plastic.

Practical set of five plastic cups in sizes 50, 100, 250, 500 and 1000 ml.

Simax graded and sterilizable bottle in heat- and chemical resistant borosilicate glass. With blue screw capsyl of plastic. Simax Glass Bottle Borosilicate 100ml Volume: 100 ml. Dimensions: Diameter 56 mm, height with capsule 105 mm. Sterilizable.

Storage container in plastic with a substantial screw cap for chemicals etc. Material: semi-transparent HDPE (high density polyethylene). Volume: 100ml. Dimensions: 106x45x45 mm. Diameter opening 23 mm.

Squirt bottle 250ml with long squirt tube.

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.