Equipment

The Milwaukee Waterproof pH55 PRO pH/Temp Tester with ATC is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.Read the manual hereDESIGN FEATURESFast easy to read results with large digital LCD readout.Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).Resolution to 0.1 pH.Lightweight and portable.Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.Simple Automatic one or two-point calibration.2 Sets of pre-memorized buffers.Gel-filled, double junction pH electrode for low maintenance and high performance.Over 300 hours of battery life (batteries included).Fully waterproof to IP65.Replaceable pH electrode Mi56P.SPECIFICATIONSpH Range: -2.0 to 16.0 pHTemperature Range: -5.0 to 60.0°C (23 to 140°F)pH Resolution: 0.1 pHpH Accuracy: ±0.1 pHTemperature Accuracy: ±0.5°C (±1°F)Typical EMC Deviation: ±0.1Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)Probe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 23 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: after 8 minutes on non-useDimensions: 254 × 67 × 47 mmWeight: 99.22 gCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

Grainfather Top/Bottom Plate Silicone Seal 37/41.

O-ring for Cornelius Keg Lid

Propylene Glycol Pure 1L 99,8%. Food grade. Can also be used with Grainfather Glycol Chiller for example. Volume 1L.

Spare part: Roller (crush roller) to Bulldog Malt Mill. 1pcs (2pcs are needed)

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15 Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" NPT threaded males on both input and output (NPT/FPT)Voltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Plastic lid for 15L fermenter with rubber grommet. Diameter ca 28,5cm

Turn your soda bottle into a smart growler quick and easy! Mount either a plastic or metal line cleaning & carbonation cap to the tee piece. Afterwards you are able to connect both a Co2 and liquid ball lock at the same time, so you can take a regular soda bottle and turn it into a growler.Note: This is for the tee piece only, you need to buy the remaining products seperatly.Do not exceed 4,5 Bar/ 65 Psi

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

The Milwaukee MW102 PRO+ pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness. Accurate to ± 0.02 pH with automatic temperature compensation (ATC). Ideal for use by brewers, wine makers, growers and other users with challenging pH measurement needs. Battery is included.SUMMARYThe Milwaukee PRO+ pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers and wine makers to hydroponic growers and farmers.The Milwaukee PRO pH meter offers:ACCURACYPeople choose the PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter is accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.TOUGHNESSThe rugged meter is built to take knocks.LOW MAINTENACEThe PRO+ pH meter comes with the Milwaukee SE220 pH probe. The SE220 is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (gel filled) and able to withstand more challenging samples (double junction). The SE220 is ideal for use in beer making, winemaking and hydroponics. SPECIFICATIONSpH Range: -2.00 to 16.00 pHTemp Range: -5 to 70°CpH Accuracy ±0.02 pHpH Resolution: 0.01 pHpH Typical EMC Deviation: ±0.2 pHTemp Resolution 0.1°CTemp Accuracy (@25°C): ±0.5°CTemperature Compensation: Automatic, 0 to 70°CTemp Typical EMC Deviation: ±0.5°CCalibration: Automatic, 1 or 2 pointspH Electrode: SE220 (included)Temperature: Probe MA830R (included)Environment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type: 1 x 9V (included)Battery Life: Approx. 300 hours of continuous useAuto-off: After 8 minutes of non-useApproximate dimensions: 5.7 x 3.1 x 1.6 inchesWeight: 1.1 lbs with batteryDESIGN FEATURESFast easy to read results with large digital LCD readoutExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilizeSimple push button, automatic two-point calibration for increased accuracyGel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storageRugged stainless temperature probe3 feet probe cables for extra flexibility when testingAuto shut off and low power demand with approx. 300 hours of continuous use (battery included)CARE AND USE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.WHAT PEOPLE ARE SAYING"Amazingly accurate, the best meter I have used so far.""Very satisfied, very accurate, rugged device that calibrates easily.""Rarely needs to be calibrated and gives perfect readings every time.""Killer tool, good value."

Electrode rinse solution (deionised water) is ideal for using as an intermediate rinse between samples or calibration solutions to avoid cross contamination. This rinse solution is also ideal for removing basic salt deposit buildup on the probe or cap caused by storage solution evaporation. Even though salt deposit buildup is normal, it should be removed before measurement or calibration.Electrode rinse solution should not be a substitute for cleaning or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.DESIGN FEATURESElectrode Rinse SolutionFundamental for gently rinsing the electrode between like samples or calibration solutions as well as rinsing off salt deposit buildup.Sealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and gently stir

Cleaning solution MA9016 is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.DESIGN FEATURES MA9016Fundamental for gently cleaning the electrode between uses and before storage.Sealed against light and air.Ideal for on-the-spot cleaning too.Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes.

Quick Disconnect O-ring Silicone 21x15mm

Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat with Dual Screen Readouts, w/Sensor. For Home Brewing & Fermentation, Breeding & Incubation, Greenhouse, Kombucha.- Plug and play design, easy to use. - Support reading with Centigrade or Fahrenheit. - Maximum output load: 1100W(110V) / 2200W(220V). - Temperature calibration, Compressor delay protection for refrigeration control.- High and low temperature alarms are available. - Dual relay output, be able to connect with refrigeration and heating equipment at the same time. - Dual display window, be able to display measured temperature and set temperature at the same time. - Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.Specifications- Temperature Control Mode :On/Off Control, Heating and Cooling - Temperature Control Range : -40~100 °C / -40~212 ° F - Temperature Resolution: 0.1 ° C / 0.1° F ​- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) - Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F- Input Power: 100 ~240VAC, 50Hz/60Hz - Temperature Control Output: Max. 10A, 100V ~240V AC - Input Power Cable Length: 1.5m (5ft) ​- Output Power Cable Length: 30cm (1ft)- Sensor Type: NTC sensor (Including) Not loose probe- Sensor Length: 2m / 6.56ft ​- Sensor's probe dimension: 50mm x 6mm- Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)- Socket (EU Version): 135x54x40mm (5.3x2.1x1.6 inch)

You can now have a check valve integrated into your ball lock disconnect. These clear/grey high quality plastic disconnects are very common in the industry but now have the added feature of having a check valve integrated into the fitting. The internal parts are made from stainless steel and the body is clear so you can see whats inside.With the MFL thread you can attach: - Barb fitting (Swivel Nut & Barb)- 8mm push in fitting- Mini All In One Regulator- Premium Mini Regulator

Keg kit 1 is a complete barrel kit with gas bottle included. The kit contains the following products:

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 1/4" (6,35 mm)Inner diameter: 4,3 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Hose clamp with diameter 10-16mm.

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear glass giving you the possibility to evaluate the colour/ clarity and to read your hydrometer.

Better Brew Mash Bag for Fruit Press 6L. Inner bag.Read the instructions here

Muslin boiling bag 100-pack

Better Brew Bench Capper for standard 26mm crown caps. Capping bottles doesn't get any easier. Colours may vary.

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

Fluidfit® HCF-UNF push-fit connection connection with female 1/4" thread UNF - connector. For 5/16" hose. N1/4" (UNF7/16-20G) and 5/16" pushfit.

The KegLand Sparge Sprinkler is a super simple device designed to help in spreading and distributing your wort in a mash tun / sparge vessel. It can also be used as the final transfer piece to assist in aerator your wort prior to pitching your yeast. It is also designed to fit through a BrewZilla Glass or Metal Distillation lid so you can recirculate evenly over your mash by adjusting the pumps ball valve or % Pump Feature for Gen 4 users.Specifications:1/2" Thread - 50mm Long - 20.4mm wide12.7mm Radial Seal Stainless Steel Barb-Tail with a 1/2" Stainless Steel Retaining Nut

This 100 Mesh filter with 8mm (5/16") duotight pushfit connectors is designed to remove larger particles easily and efficiently, which can help protect your brewing equipment and can also be used as a home inline water filter. It can also be used as a light-duty keg to keg hop filter. Just ensure you have cold crashed and sanitized efficiently prior to use.It is made from food-grade Acetal plastic and has a 100 mesh. The 8mm (5/16") duotight fittings make it simple and easy just pushing it in the compatible and recommended tubing.Please note:The filter is designed for it to be mounted near your water inlet and away from direct sunlight.Always test for leaks prior to leaving the filter unattended.If water supply exceeds 100psi, we advise using an inline water filter and duotight reducers/splicers.

Connection kit for iTap for carbonation and bottling if you already have iTap, keg for ball couplings, regulator with 3/8" female and sodastream carbonation cartridge. Contains all couplings, adapters and tubing needed (tube comes in a full length that can be cut to suitable lengths ). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.NOTE! Does not include iTap, keg for ball lock, regulator with 3/8" female or sodastream carbonation cartridge.

Analog kitchen thermometer in stainless steel for pots and pans. Clear numbers. Smart clamp for the pan edge (removable). Not to be used in the oven. Measuring range: 0 to 220 °C. Diameter 70mm.Can be used as:Cooking thermometerKitchen thermometerHousehold thermometerMatter thermometerFrying thermometerMeat thermometerBack thermometerPot thermometerPan thermometer etc.

Analog oven thermometer in stainless steel. The oven thermometer can stand on its own or be suspended. Measuring range: 50 - 300 °C (NOTE! does not measure minus degrees). Diameter 60mm.Can also be used as:Cooking thermometerKitchen thermometer

Blue Metallic Crown Caps 75-pack 26mm

Conical silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 23 mmDiameter Bottom: 17 mmHeight: 26 mmHole: 9 mm

Fluidfit HUY5/16-5/16G Y-connector Female 5/16" (8mm). Beer or Gas. Pushfit

PET Keg 20L Oxebar Amber from Kegland with Ball Lock connectors, Dip Tube, Floater & Handle is a very easy and convenient way to store and transport beer compared to heavy and bulky steel kegs like Cornelius kegs. It's a very inexpensive way to serve draft beer and bring beer to all kinds of events. Because it can be washed and reused, it's also an inexpensive way to store your beer. Do not exceed 4 Bar / 65psi. With the special polymer mixture, the oxygen barrier is improved three times compared to regular PET. Beer can easily be stored up to 6 months in these kegs. Diameter 235mmHeight 640mm  Do not exceed 4 Bar / 65psi. Contains:- 20L PET Keg Oxebar Amber Mono Barrier- Lid with handle- Green relief valve (65 psi/4.5 bar)- 1 meter silicone hose (dip tube) with floater and filter- Red Ball Cap for FermZilla, Carbonation Cap- Yellow Ball Cap for FermZilla, Carbonation Cap

Brewly Seals 10-pack for Carbonation Caps & Ball Locks

Stainless steel Mesh filter screen for Bazooka 30cm. NOTE! No couplings included, only net/mesh. Fits well on 1/2" thread/pipe with hose clamp (not included). Length: 30 cm (12")Diameter filter: approx. 22 mmMesh size: ca 0,5mm (fine)

Ball lock disconnect with integrated Duotight 6,35mm (1/4") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. The Google Play Android App can be downloaded via the link below.https://play.google.com/store/apps/details?id=io.rapt The Apple App Store RAPT App can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device.  It also gives you the added functionality of push notifications to your mobile device This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal (https://app.rapt.io/).  This greatly reduces the need for handwritten records of your brew day as it's all done automatically.  The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main units probe and this digital thermometer. This unit can also be setup to get push notifications to your mobile phone of when to sparge for example.Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the probe is.Greater accuracy for a more repeatable recipe that results in much better beer! Specifications:20cm Probe Length with sharp tip~ Please remove the black plastic tip before use. That is for storage to avoid punctures / injury.100cm Cable LengthMagnetised Backing Plate (Orange)2 x AAA Batteries (included) Please note, the LCD display and button are not water resistant. If you get liquid into these areas it may damage the accuracy / visibility.

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications.  With Manometer 0-10 bar (0-150 psi). This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals. These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing.  For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.Suits pressures 0-150psi (0-10 bar)Suitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 6.35mm (1/4") OD Tubing such as our Evabarrier TubingIncludes integrated manometer 0-10 bar (0-150 psi) Pressure Gauge

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Hose Clam Butterfly Stainless Steel, adjustable 25-44mm with plastic butterfly thumb screw. Yellow - Color may vary.

This tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: Tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

Tap Faucet 3/4" with bottle filler

Stainless self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid/beer post. Barb: 6.5 mm (1/4"), also fits 5/16".

Stainless self-closing quick disconnect for ball lock cornelius kegs. White coupling that fits on the Gas post. Barb: 6.5 mm (1/4"), also fits 5/16". Stainless steel 304.

304 Stainless Steel Tap. 200 PSI rated. 3/8" BSP thread This extremely durable material won't tarnish easily, and you never have to worry about your beer tasting bad with an unpleasant metallic taste.

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  3/8" barb & 1/2" Male  ThreadInlet: 1/2" Female and 1/2" Male Thread and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

This is a universal stainless-steel tri-clamp and will fit any 3" tri-clamp connection. It is easy to mount. This tri-clamp will fit many fermenters. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard. Gasket is sold separately.

Multifunctional cleaning agent for use in the food and beverage industry. Discover this new addition to the Chemipro range!effective at all temperaturessafe to use on all types of plastics and soft metalsgenerates 4-5% oxygenhigh hard water toleranceremoves protein soil and stains, encrusted starch and fatty acidsdo not use on Teflondosage for general cleaning: 7-14 g/litredosage for intensive cleaning: 21 g/litreDirections for use:use 7-14 g per litre of warm water for general cleaning. Scrub or soak for 30 minutes. Use Chemipro CIP or SAN for rinsing. Keep out of reach of children. Chemipro Wash is a registered detergent Danger. Contains: SODIUM METASILICATE 15%-30%; SODIUM CARBONATE PEROXIDE 15%-30%; SODIUM SILICATE 5% - 15%; CAPRYLETH-9 CARBOXYLIC ACID

Conical silicone plug stopper without hole. Cylindroconical form.Diameter Top: 15 mmDiameter Bottom: 11 mmHeight: 21 mm