Equipment

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 1/4" (6,35 mm)Inner diameter: 4,3 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

T-connector Stainless with 8mm hose barbs

Brewly Brew Bag 40L is a strong nylon bag for BIAB (Brew-In-A-Bag). Nylon is stronger than Polyester, which many other brew bags are made of. Measures 55x75cm. Fits most kettles between 10-40L up to 35cm in diameter. Easy to clean.Length: 55cmDepth: 75 cmMaterial: Nylon, BPA freeNote: Kettle is not included.

Hose Clamp to regulate and stop the flow in hose up to 12mm in diameter. Black plastic.

Rubber washer for patent corks (Swing Top) 12-pack. 22mm outer diameter and 6mm hole in the middle.

Calcium Chloride 100g, 77%, food grade

Jonas Juice Strainer Bag with polyester weave.

Corking Machine De Luxe for wine corks.

Better Brew Beer Paddle 24" 61cm - Designed for especially for Homebrew. Food grade plastic stirring spoon/paddle. This long handle food grade paddle reaches right to the bottom of pretty much all fermentation vessels, barrels, kegs and buckets. An essential peice of kit.

Better Brew Caps. 26mm crown caps.

Bottlewasher Avvinatore Lux, rinse your bottles with one motion.

Silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 53 mmDiameter Bottom: 28 mmHeight: ca 32 mmHole: 9 mm

Stainless Float With Silicone Dip Tube 80cm. Ensure that only the top layer of beer is poured from the fermenter, also fits Fermzilla perfectly. Silikcone tube measurements (dip tube):Inner diameter: 6mm (ID 0.23”)Outer diameter: 8mm (OD 0,35”) Floater diameter: 43mm

Classic model, long and slim, with eyelet. Easy to read.- Range:  -10 to +110°C      - Length 31 cm - Diameter ø 7 mm

Silicone plug stopper without hole. Cylindroconical form.Diameter Top: 45 mmDiameter Bottom: 35 mmHeight: 30 mm

Silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 49 mmDiameter Bottom: 38 mmHeight: 30 mmHole: 9 mm

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 480 mmHeight: 640 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and not included.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Juice Strainer Metal with removable strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. Easy to clean after use.

Champagne Bottle Plastic Corks 25-pack. Should be secured with wires (sold separately).

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

Funnels Set 50/70/100/115mm Plastic

Brand new Hop Sock design with far stronger stitching all the way around. Suited for dry hopping or steeping grain or spices in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag.  Dimensions:130 x 580 mm

Hose Clamp Butterfly Stainless Steel Adjustable 14-25mm

Bottle filler in stainless steel that fills the bottle from the bottom up. Thanks to the spring-loaded valve at the bottom, the operation is simple: press down on the bottom of the bottle and beer comes, lift up, and it stops flowing. - Food grade stainless steel 304 bottle filler- Stainless steel bottle filling: 10.3 mm hose (inner diameter)- Fits 3/8'' or 5/16'' ID silicone tubing- Highly corrosion resistant interior and exterior - ideal for wet gases- Cylinders work well at low temperatures- Easy to clean and disinfect- Spring-loaded tip for easy filling- Fills bottles from the bottom up- Prevents spillage - Brew during bottling- Includes nylon brush for easy cleaning A removable tip and spring make this model easy to disinfect.  the nozzle spring can be removed if you prefer the effect of a springless bottle filler.  The package includes:1 pc Stainless Steel Bottle Filler 35cm1 pc Nylon Brush

Tap Faucet with handle and ball lock connector (included). 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. Connect it directly to a beer or soda keg. Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap).

Silicone plug stopper without hole. Cylindroconical form.Diameter Top: 37 mmDiameter Bottom: 28 mmHeight: 30 mm

Bottle filler for tap with Silicone/PVC-hose connector to classic tap. NOTE: Doe NOT fit on taps with barbs, use the tap thats linked on this page below. End cap is removable.

Cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution. Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.DESIGN FEATURESFundamental for gently cleaning the electrode between uses and before storage.Sealed against light and air.Ideal for on-the-spot cleaning too.Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes.

Brewly TC-320 Digital Universal Thermostat. EU-version power cord (UK power cord not included).

iTap for 26mm crown bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or counter-pressure fill your bottles safely without any issues.This model comes with a clamp lock for 26mm crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

Simple Corking Machine Ferrari Handy for wine corks.

Better Brew Caps. 26mm crown caps.

Better Brew Bottle Brush 32cm. Total length: 32cm. Brush length: 13cm.

Better Brew Bottle Brush 46cm Cranked. Food grade. Colour may vary.

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

High Quality Polyester Bag 63 micron mesh with 25mm Webbing. These polyester bags are strong and resilient! Made to line a pot up to 55cm in Diameter, the bags actual dimensions are 800mm wide by 550mm deep and are suitable for boiling as well up to 110C.

Silicone plug stopper without hole. Cylindroconical form.Diameter Top: 33 mmDiameter Bottom: 25 mmHeight: 28 mm

Silicone plug stopper for without hole. Cylindroconical form.Diameter Top: 95 mmDiameter Bottom: 78 mmHeight: 45 mm

Threaded Carbon dioxide cartridges for sodasiphones, cartridges can be used in sodasiphones or along with adapter to mini regulators. CO2 Cartridges Threaded 16g 10 pack contains: 10 pcs threaded CO2 cartridges of steel. A cartridge contains about 16 grams of carbon dioxide gas.  (Note! Appearance and labeling may vary)

Clamp/holder for the Pump Siphons. Keeps them steadier when used with a fermenter. Black plastic. Fits all pump siphons with around 23mm diameter.

pH-sticks 5,2-6,8 20-pack

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.Use- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather. - Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes. - Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes. - Rinse all surfaces that came in contact with the cleaner thoroughly with winter. - Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains. Rinse and drain.

A simple plastic tap faucet that attaches directly to the beer line. 7 mm (1/4") barb.

Bottle Brush for wine bottles 36cm

Heavy duty stainless steel mash paddle from Brewly. Length 60cm.

T-connector Stainless with 6mm hose barbs

Milwaukee pH600 is a compact digital pH-pen with measuring range 0.0 to 14.0 pH, ±0.1 pH accuracy and a resolution of 0.1 pH. Comes with batteries, calibration screw driver and instructions in a hard Milwaukee carrying case.NOTE: Calibration solution and storage solution are not included.Design features- Fast, accurate results with digital LCD readout.- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.- Simple 1 point calibration with an easy-to-use trimmer located on the back of the tester to protect from accidental splashes.- Cap to protect the pH sensor and keep it wet when stored upright.- Low power demand for extended battery life (batteries included).- Comes in a hard carrying case complete with calibration screw driver, batteries and instructions.SpecificationspH range: 0.0 to 14.0 pHResolution: 0.1 pHAccuracy: +/- 0.1 pHTypical EMC Deviation: +/- 0.2 pHCalibration: Manual, 1 PointEnvironment: 32°F to 122°F (0 to 50°C) 95% RHApproximate dimensions: 6 x 1.2 x 0.95 inchesWeight: 3 ounceBattery Type: 3 x 1.5 V Alkaline (included)Battery Life: 700 hoursUse and careAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Pen will give you fast, accurate results for longer.Here are our top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water.2. Clean your Pen regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Pen in the sample for a faster result.

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin 3/16" tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.